High compatibility for bluetooth music receiver for Apple iphone ipod

High compatibility for bluetooth music receiver for Apple iphone ipod 1:two versions:common and strengthen 2:seven colors

High compatibility for bluetooth music receiver for Apple iphone ipod

(1)  I -WAVE (common)   

Bluetooth music receiver connects directly to iPod speaker 30-pin dock, and then the red LED lamp and the blue LED lamp will flicker alternately until they enter paring mode, which means the device starts to work normally. Perform bluetooth paring operations after it is on for 30 seconds.After it enters paring mode, enable the bluetooth function for the devices such as iPad, iPhone, bluetooth PC, cell phone and any other digital products with bluetooth function. Search bluetooth devices or new devices to find     I-WAVE and connect it. Password input for paring is needed, and the default password is: 0000.After successful paring, the red LED lamp will turn off and the blue LED lamp will flicker slowly, which means it has been connected already. Then we can play music by player.To change the play device during normal operation, disconnect the connected bluetooth PC and cell phone, and then perform paring connection for other bluetooth devices.

Technical Specification

¢ Complies with Bluetooth 2.0

¢ Support A2DP V1.2

¢ Powered from 30-pin dock

¢ Transmission distance: not less than 10 meters

¢ The indicators flicker alternately when there is no connection. Blue light flicker slowly after successful connection

(2) I - LINE (strenthen)

 

Specifications

1. Bluetooth version : Bluetooth V2.1 + EDR , Class 2

2. Bluetooth profiles : A2DP & AVRCP

3. Bluetooth frequency range : 2.4GHZ - 2.4835GHZ

4. Effective range : 10 meters

Introduction

1. I-Link is a stereo Bluetooth receiver especially designed for iPod dock station. 

2. Plug this receiver into iPod dock station, the music will be transmitted to dock station from your iPod, MP3 player and mobile phone which have Bluetooth stereo function. 

3. It is fully plug & play and it does not need extra power.

Connecting I-Link to the dock station

1. Turn on the dock station before plugging the receiver. 

2. Then set the audio source to iPod.

3. Finally plug the receiver into the iPod dock 30 Pin connector port and the receiver will start to flash blue and red alternately.

Pairing I-Link with a Bluetooth device

1. Once the receiver is plugged in ,it will automatically enter in pairing mode.

2. At this time you can turn on your Bluetooth device to search for "I-Link" and pair it.

3. When "I-Link" is detected , enter the PIN “0000” and confirm.

4. After successful pairing, select "I-Link" from Bluetooth device list and press "connect".

5. After successful connecting, the indicator light of iReceiver will be blue flashing slowly.

Notes

Keep it far away from high temperature and damp environment; place it in ventilated and dry environment. Exposure to rain and severe shock is forbidden!Do not open the cover at will in case of electrical shock or any other accidents. For repairs, ask help from maintenance stations of our company or professional personnels.If any metal part or liquor drops into it, switch off the power at once. It can be used only after examination by professional personnels.Pull it out when you do not use it.

High compatibility for bluetooth music receiver for Apple iphone ipod